banner



How To Install Window Ledge

How to Install an Interior Window Sill

Past Robert Robillard on Tool and Product Reviews

Finished look

Finished look

How to Install a Window Sill

People do not often think most window sills but they are an integral part of interior time and window trim. A well-executed window sill installation can create a finished, classy look.

A window sill is made upwardly of two parts, the shelf is the base or bottom of the air current w and the apron. Or "stool" is the decorative window trim underneath the shelf.

Whether you are changing out trim, remodeling or simply adding windowsills to plastered openings, the outcome tin can create a customized, finished await.

Finished look

Finished look

Steps on How to Install an Interior Window Sill

  1. Mark 3/sixteen" or a ¼" reveal marking on your window jambs.
  2. Concur a scrap piece of your window trim casing confronting each window side, and at your reveal mark.
  3. Mark a reference line on the wall, on each side of the window.
  4. Make up one's mind your window sill "horn" overhang. I typically utilise ¾" for an overhang.
  5. Measure the altitude between the two wall marks, then add 1-1/2 inches to factor in your ¾" overhang on each side. This measurement is your window sill length.
  6. Cut the window sill stool to length.
  7. If desired, apply a router to create a ½ round over on the front edge and sides
  8. Sand out the router bit mill marks
  9. Hold the window sill against the window and on your layout lines. Use a compass scribe to marker where information technology meets the window sash and wall. Utilise a combination or speed squared to consummate your lines. I oft put an "10" in the areas I will be cut out, equally a reminder.
  10. Trim the stool along the scribed lines using a jigsaw.
  11. Set the stool in place, and make necessary adjustments to become the window sill tight to the window and flanking walls.
  12. Attach the stool to the windowsill using 6d or 8d finishing nails.
  13. Install the side window trim
  14. Nail window trim casings to the window's side jambs using 6d finishing nails. Blast up through the window sill and into the vertical casing for a tight joint.

Source: https://www.aconcordcarpenter.com/how-to-install-an-interior-window-sill.html

Posted by: beachmexpeek.blogspot.com

0 Response to "How To Install Window Ledge"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel